Brown Stoneware Round Cascade Split Woodash Finish Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features a round cascade body with a unglazed mottled woodash split finish fired in a gas kiln. The pot measures 17cm across the rim, stands 8cm high, has a bowl depth of 6.5cm and weighs 1000 gm. Or in inches, 4.7" across the rim, stands 3.1" high and has a bowl depth of 2.6". The pot is raised on three feet with one drainage hole and three tie down holes. This pot is suited for a cascade bonsai, and is also perfect for small cacti, succulents and seedlings.

Brown Stoneware Round Split Woodash Finish Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features a round body with a unglazed mottled woodash split finish fired in a gas kiln. The pot measures 12.5cm across the rim, stands 5.5cm high, has a bowl depth of 4cm and weighs 430 gm. Or in inches, 4.9" across the rim, stands 2.2" high and has a bowl depth of 1.6". The pot is raised on three feet with one drainage hole and three tie down holes.

Blue Stoneware Round Cascade Bonsai Pot This handmade stoneware bonsai or succulent pot features a round body with a blue glaze reduction fired in a gas kiln. The pot measures 18cm across the rim, stands 9.5cm high, with a depth of 8cm and weighs 1000 gm. Or in inches, 6.7" across the rim and stands 3.7" high with a depth of 3.1". The pot is raised on three feet with one drainage hole and four tie down holes. It is unglazed on the inside. This pot is suited for a cascade or semi cascade bonsai, and is also perfect for cacti, succulents and seedlings. The blue glaze would suit wisteria trees or a deciduous tree.

Brown Stoneware Round Cascade Split Woodash Finish Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features a round cascade body with a unglazed mottled woodash split finish fired in a gas kiln. The pot measures 12cm across the rim, stands 8cm high, has a bowl depth of 6.5cm and weighs 1000 gm. Or in inches, 4.7" across the rim, stands 3.1" high and has a bowl depth of 2.6". The pot is raised on three feet with one drainage hole and three tie down holes.

Grey - Blue Stoneware Rectangular Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features a smooth body with a blue grey glaze reduction fired in a gas kiln. The pot measures 17cm by 12cm across the rim, stands 5cm high, has a bowl depth of 3.5cm and weighs 720gm. Or in inches, 6.7" by 4.7" across the rim, stands 2" high and has a bowl depth of 1.4". The pot is raised on four feet with one drainage hole and eight tie down holes.

Blue Stoneware Round Cascade Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features a round body with a blue glaze reduction fired in a gas kiln. The pot measures 17.5cm across the rim, stands 9.5cm high, with a depth of 8.5cm and weighs 1060 gm. Or in inches, 6.9" across the rim and stands 3.7" high with a depth of 3.3". The pot is raised on three feet with one drainage hole and four tie down holes. It is unglazed on the inside. This pot is suited for a cascade or semi cascade bonsai, and is also perfect for cacti, succulents and seedlings. The blue glaze would suit wisteria trees or a deciduous tree.

Blue Glazed Stoneware Round Literati Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features a round body with a blue glaze reduction fired in a gas kiln. The pot measures 19.5cm across the rim, stands 4.5cm high, has a bowl depth of 3.5cm and weighs 810 gm. Or in inches, 7.7" across the rim, stands 1.8" high and has a bowl depth of 1.4". The pot is raised on three feet with one drainage hole and six tie down holes. The inside is unglazed.

Grey / Blue Glazed Stoneware Round Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features a round body with a grey / blue glaze reduction fired in a gas kiln. The pot measures 14cm across the rim, stands 4.5cm high, has a bowl depth of 3.5cm and weighs 380 gm. Or in inches, 5.5" across the rim, stands 1.8" high and has a bowl depth of 1.4". The pot is raised on three feet with one drainage hole and three tie down holes. The inside is unglazed.

Oval Glazed White and Brown Split Finish Stoneware Bonsai Pot with a Green and Blue Glaze – Hand Made in Australia This handmade stoneware bonsai or succulent pot features an oval body with a split finish. The pot has a white and brown reduction finish with a partial blue and green glaze that gives an aged appearance on a dark brown clay. Reminiscent of the dry creek beds and dams around the country at present. The pot measures 23.5cm by 19.5cm across the rim, stands 6.5cm high, has a bowl depth of 5cm and weighs 1430gm. Or in inches, 9.3" by 7.7" across the rim, stands 2.6" high, has a bowl depth of 2". The pot is raised on four feet with two drainage holes and eight tie down holes. It is frost proof under almost all conditions

Round White and Brown Split Finish Stoneware Unglazed Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features an round body with a textured unglazed finish. The pot has a white and brown reduction finish that gives an aged appearance on a dark brown clay. Reminiscent of the dry creek beds and dams around the country at present. The pot measures 26.5cm across the rim, stands 6.5cm high, has a bowl depth of 5.5cm and weighs 2000gm. Or in inches, 10.4" across the rim, stands 2.6" high, has a bowl depth of 2.2". The pot is raised on four feet with three drainage holes and eight tie down holes. It is frost proof under almost all conditions. This pot is suited for most bonsai, also perfect for cacti, succulents and seedlings. The black and brown split finish brown stoneware provides an aged effect idea for showing off your tree.

This Multi Coloured Glazed Stoneware Rectangle Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features a smooth rectangular body with a multi coloured glaze reduction fired in a gas kiln. ** This is a one of a kind colour pattern and is unlikely to be duplicated ** The pot measures 26.5cm by 20cm across the rim, stands 8cm high, has a bowl depth of 7cm and weighs 1700 gm. Or in inches, 10.4" by 7.9" across the rim, stands 3.1" high and has a bowl depth of 2.8". The pot is raised on four feet with two drainage holes and eight tie down holes. The inside is unglazed.

Round Black and Brown Split Finish Stoneware Unglazed Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features an oval body with a textured unglazed finish. The pot has a black and brown reduction finish that gives an aged appearance on a dark brown clay. Reminiscent of the dry creek beds and dams around the country at present. The pot measures 36.5cm x 27cm across the rim, stands 5.5cm high, has a bowl depth of 4.5cm and weighs 2300gm. Or in inches, 14.4" x 10.6" across the rim, stands 2.2" high, has a bowl depth of 1.8". The pot is raised on four feet with three drainage holes and ten tie down holes. It is frost proof under almost all conditions.

Oval Black and White Split Finish Stoneware Unglazed Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features an oval body with a textured unglazed finish. The pot has a black and white reduction finish that gives an aged appearance on a dark brown clay. The pot measures 33cm by 24cm across the rim, stands 7.5cm high, has a bowl depth of 6cm and weighs 2000gm. Or in inches, 13" by 9.4" across the rim, stands 3" high, has a bowl depth of 2.4". The pot is raised on four feet with three drainage holes and ten tie down holes. It is frost proof under almost all conditions.

Round Glazed White and Brown Split Finish Stoneware Bonsai Pot with a Green and Blue Glaze – Hand Made in Australia This handmade stoneware bonsai or succulent pot features an round body with a split finish. The pot has a white and brown reduction finish with a partial blue and green glaze that gives an aged appearance on a dark brown clay. Reminiscent of the dry creek beds and dams around the country at present. The pot measures 26cm across the rim, stands 6cm high, has a bowl depth of 4cm and weighs 1700gm. Or in inches, 10.2" across the rim, stands 2.4" high, has a bowl depth of 1.6". The pot is raised on three feet with two drainage holes and six tie down holes. It is frost proof under almost all conditions

Round Black and White Split Finish Stoneware Unglazed Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai pot features a round body with a textured unglazed finish. The pot has a black and white reduction finish that gives an aged appearance on a dark brown clay. The pot measures 17cm across the rim, stands 4.5cm high, has a bowl depth of 3cm and weighs 600gm. Or in inches, 6.7" across the rim, stands 1.8" high, has a bowl depth of 1.2". The pot is raised on three feet with three drainage holes and six tie down holes. It is frost proof under almost all conditions.

Oval Black and Brown Split Finish Stoneware Unglazed Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features an round body with a textured unglazed finish. The pot has a black and brown reduction finish that gives an aged appearance on a dark brown clay. Reminiscent of the dry creek beds and dams around the country at present. The pot measures 35cm x 25.5cm across the rim, stands 6.5cm high, has a bowl depth of 4.5cm and weighs 2200gm. Or in inches, 13.8" x 10" across the rim, stands 2.6" high, has a bowl depth of 1.8". The pot is raised on four feet with three drainage holes and ten tie down holes. It is frost proof under almost all conditions.

Round Red and Brown Split Finish Stoneware Unglazed Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features a round body with a textured unglazed finish. The pot has a red textured appearance that would suit a red flowering tree, or a tree with red tinged leaves. The pot measures 19cm across the rim, stands 4.5cm high, has a bowl depth of 3.5cm and weighs 800gm. Or in inches, 7.5" across the rim, stands 1.8" high, has a bowl depth of 1.4". The pot is raised on three feet with one drainage hole and six tiedown holes. It is frost proof under almost all conditions. This pot is suited for a most bonsai, also perfect for cacti, succulents and seedlings. The red split finish brown stoneware provides an fantastic balance to a flowering tree, or to a tree with re tinge to its leaves.

Round Blue and Brown Split Finish Stoneware Unglazed Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features a round body with a textured unglazed finish. The pot has a blue textured appearance that would suit a blue flowering tree, or a tree with blue tinged leaves. The pot measures 19cm across the rim, stands 5.5cm high, has a bowl depth of 4.5cm and weighs 900gm. Or in inches, 7.5" across the rim, stands 2.2" high, has a bowl depth of 1.8". The pot is raised on three feet with one drainage hole and six tiedown holes. It is frost proof under almost all conditions.

Round Glazed White and Brown Split Finish Stoneware Bonsai Pot with a Green and Blue Glaze – Hand Made in Australia This handmade stoneware bonsai or succulent pot features an round body with a split finish. The pot has a white and brown reduction finish with a partial blue and green glaze that gives an aged appearance on a dark brown clay. Reminiscent of the dry creek beds and dams around the country at present. The pot measures 31cm across the rim, stands 7cm high, has a bowl depth of 5cm and weighs 2300gm. Or in inches, 12.2" across the rim, stands 2.8" high, has a bowl depth of 2". The pot is raised on four feet with three drainage holes and eight tie down holes. It is frost proof under almost all conditions

Round Red and White Split Finish Stoneware Unglazed Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features an round body with a split finish unglazed finish. The pot has a red and white finish that is ideal for a flowering australian native or a tree with a red tinge to the leaves. The pot measures 26cm across the rim, stands 7cm high, has a bowl depth of 5.5cm and weighs 1800gm. Or in inches, 10.2" across the rim, stands 2.8" high, has a bowl depth of 2.2". The pot is raised on three feet with three drainage holes and six tie down holes. It is frost proof under almost all conditions. This pot is suited for a most bonsai, also perfect for cacti, succulents and seedlings. The red and white split finish brown stoneware provides an effect idea for showing off your tree flowering tree.

Brown Smooth Finish Square Stoneware Unglazed Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features an square body with an unglazed finish. The pot measures 18cm across the rim, stands 7.5cm high, has a bowl depth of 5.5cm and weighs 1200gm. Or in inches, 7.1" across the rim, stands 3" high, has a bowl depth of 2.1". The pot is raised on four feet with one drainage hole and eight tie down holes. It is frost proof under almost all conditions.

Brown Stoneware Square Cascade Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features a square low body with a unglazed mottled woodash finish fired in a gas kiln. The pot measures 11cm across the rim, stands 19cm high, has a bowl depth of 14.5cm and weighs 1700 gm. Or in inches, 4.3" across the rim, stands 7.7" high and has a bowl depth of 5.7". The pot is raised on four feet with one drainage hole and four tie down holes.

Oval White and Brown Split Finish Stoneware Unglazed Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features an oval body with a textured unglazed finish. The pot has a white and brown reduction finish that gives an aged appearance on a dark brown clay. Reminiscent of the dry creek beds and dams around the country at present. The pot measures 31cm by 23cm across the rim, stands 8cm high, has a bowl depth of 6cm and weighs 2300gm. Or in inches, 12.2" by 9.1" across the rim, stands 3.1" high, has a bowl depth of 2.4". The pot is raised on four feet with three drainage holes and ten tie down holes. It is frost proof under almost all conditions. This pot is suited for most bonsai, also perfect for cacti, succulents and seedlings. The black and brown split finish brown stoneware provides an aged effect idea for showing off your tree.

Round Black and White Split Finish Stoneware Unglazed Bonsai Pot – Hand Made in Australia This handmade stoneware bonsai or succulent pot features an round body with a textured unglazed finish. The pot has a black and white reduction finish that gives an aged appearance on a dark brown clay. The pot measures 17.5cm across the rim, stands 8.5cm high, has a bowl depth of 7cm and weighs 1200gm. Or in inches, 6.9" across the rim, stands 3.3" high, has a bowl depth of 2.8". The pot is raised on three feet with one drainage hole and three tie down holes. It is frost proof under almost all conditions.